請輸入網站標題
清空記錄
歷史記錄
取消
清空記錄
歷史記錄
瀏覽器自帶分享功能也很好用哦~精準七軸角度深孔鉆，集銑、攻牙、深孔鉆及單管鉆(選配)加工為一體，由于主軸雙螺桿雙馬達驅動，配合數控旋轉工作臺，在短時 間互換深孔鉆模式及銑削模式，所以可作復雜加工動作，例如：角度深孔鉆加工，角度銑削加工及角度攻牙加工，立柱可前后移動，較大 提高在加工時之靈活性。
產品詳情
外形尺寸圖
主要參數表
| 項目/ITEM | 單位/Unit | AMG18D | |
| 數控系統Numerical Control System | FANUC Oi-MF(可選配新代系統)Optional SYNTEC | ||
| 加工孔直徑Machining HoleDiameter | mm | 30-38檢鉆(&ndrl1φ180-65單管法1BTA | |
| 工作臺左右行程(X軸)Worktable Left-Right(X-Axis) | mm | 1400 | |
| 上、下行程(Y軸) | Up-Down(Y-Axis) | mm | 1300 |
| 立柱前后行程(Z軸)ColumnFront-Back(Z-Axis) | mm | 1000 | |
| 加工深度行程(W軸) DrillingDepth(W-Axis) | mm | 1300 | |
| 主軸搖擺角度(A軸) SpindleSwingAngle(A-Axis) | 。 | 主軸向上20度，向下35度/SpindleUpwards20°,Downwards35° | |
| 槍鉆加工深度Gun DrillingDepth | mm | 1100 | |
| 單管鉆加工深度BTA Driling Depth | mm | N/A | |
| 數控轉臺尺寸Worktable Size | mm | 1000×1200 | |
| 數控轉臺較小分度Min.Division of Worktable | 。 | 0.001° | |
| 數控轉臺負重Worktable Load Capacity | Ton | 10 | |
| 主軸調速范圍SpindleSpeedRange | rev/min | 50-6000(無級)槍鉆(Gundri 50-4000(無級)銑(Miling) | |
| 刀具進給速度范圍ToolFeedSpeedRange | mm/min | 1~180(無級) | |
| X/Y/Z/W軸快移速度X/Y/ZW Axis Rapid Traverse Speed | mm/min | 5000 | |
| 數控轉臺較高轉速Max.Speed ofWorktable | rpm | ||
| A軸快移速度 Rapid Traverse Speed of A-Axis | 。/min | 350 | |
| 主軸電機功率Spindle Motor Rower | KW(Nm) | 槍鉆(Gun drill)11-15(52.5)銑(Milling)75-11(35) | |
| 伺服電機功率Servo Motor Powe | 工作臺左右行程(X-Axis) | KW(Nm) | 2.5(20) |
| 上下移動行程(Y-Axis) | KW(Nm) | 3(27) | |
| 立柱前后行程(Z-Axis) | KW(Nm) | 3(27) | |
| 加工深度行程(Z-Axis) | KW(Nm | 2.5(20) | |
| 主軸搖擺角度(Z-Axis) | KW(Nm) | 3(27) | |
| 數控轉臺(B-Axis) | KW(Nm) | 2.5(20) | |
| 機床總功率Total Power ofMachineTool | kw | 65 | |
| 切削油較大壓力 | Max.Pressure of CuttingOi | Mpa | 8槍鉆(Gundrill)/1.7單管鉆(BTA) |
| 切削油較大流量Max.Flow Rate of Cutting Oil | L/min | 98槍鉆(Gundrill)/200單管鉆(BTA) | |
| 切削油箱容量Cutting Oil Tank Capacity | L | 800 | |
| 主軸規格(較大直徑)TypeofSpindle(Max.Diameter) | mm | 槍鉆(Gun drillOZ25銑(Miling)BT50(32) | |
| 主軸軸數Number of Spindle | / | 2軸 | |
| 潤滑方式Lubrication Method | / | 中間潤滑Centralized Lubrication System | |
| 工作臺T型槽Worktable T-Slot | mm | 21.5 | |
| 電氣供給ElectricalSupply | V/A | 三相(3-phase)380V /60A | |
| 主軸連接方式Spindle Connection Method | 同步皮帶SynchronousBelt | ||
| 鉆孔的直線度Straightness of Drilling | mm | 孔徑線對基準的偏斜0.5/1000 | |
| 鉆孔的表面粗糙度Surface Roughness of Driling | μm | Ra≤3.2 | |
| 鉆孔的孔徑光潔度Aperture Roughness ofDriling Hole Diameter | H | H8-H11 | |
| 機床總重量Total Weight ofMachineTool | Ton | 19 | |
產品詳情
外形尺寸圖
主要參數表
| 項目/ITEM | 單位/Unit | AMG18D | |
| 數控系統Numerical Control System | FANUC Oi-MF(可選配新代系統)Optional SYNTEC | ||
| 加工孔直徑Machining HoleDiameter | mm | 30-38檢鉆(&ndrl1φ180-65單管法1BTA | |
| 工作臺左右行程(X軸)Worktable Left-Right(X-Axis) | mm | 1400 | |
| 上、下行程(Y軸) | Up-Down(Y-Axis) | mm | 1300 |
| 立柱前后行程(Z軸)ColumnFront-Back(Z-Axis) | mm | 1000 | |
| 加工深度行程(W軸) DrillingDepth(W-Axis) | mm | 1300 | |
| 主軸搖擺角度(A軸) SpindleSwingAngle(A-Axis) | 。 | 主軸向上20度，向下35度/SpindleUpwards20°,Downwards35° | |
| 槍鉆加工深度Gun DrillingDepth | mm | 1100 | |
| 單管鉆加工深度BTA Driling Depth | mm | N/A | |
| 數控轉臺尺寸Worktable Size | mm | 1000×1200 | |
| 數控轉臺較小分度Min.Division of Worktable | 。 | 0.001° | |
| 數控轉臺負重Worktable Load Capacity | Ton | 10 | |
| 主軸調速范圍SpindleSpeedRange | rev/min | 50-6000(無級)槍鉆(Gundri 50-4000(無級)銑(Miling) | |
| 刀具進給速度范圍ToolFeedSpeedRange | mm/min | 1~180(無級) | |
| X/Y/Z/W軸快移速度X/Y/ZW Axis Rapid Traverse Speed | mm/min | 5000 | |
| 數控轉臺較高轉速Max.Speed ofWorktable | rpm | ||
| A軸快移速度 Rapid Traverse Speed of A-Axis | 。/min | 350 | |
| 主軸電機功率Spindle Motor Rower | KW(Nm) | 槍鉆(Gun drill)11-15(52.5)銑(Milling)75-11(35) | |
| 伺服電機功率Servo Motor Powe | 工作臺左右行程(X-Axis) | KW(Nm) | 2.5(20) |
| 上下移動行程(Y-Axis) | KW(Nm) | 3(27) | |
| 立柱前后行程(Z-Axis) | KW(Nm) | 3(27) | |
| 加工深度行程(Z-Axis) | KW(Nm | 2.5(20) | |
| 主軸搖擺角度(Z-Axis) | KW(Nm) | 3(27) | |
| 數控轉臺(B-Axis) | KW(Nm) | 2.5(20) | |
| 機床總功率Total Power ofMachineTool | kw | 65 | |
| 切削油較大壓力 | Max.Pressure of CuttingOi | Mpa | 8槍鉆(Gundrill)/1.7單管鉆(BTA) |
| 切削油較大流量Max.Flow Rate of Cutting Oil | L/min | 98槍鉆(Gundrill)/200單管鉆(BTA) | |
| 切削油箱容量Cutting Oil Tank Capacity | L | 800 | |
| 主軸規格(較大直徑)TypeofSpindle(Max.Diameter) | mm | 槍鉆(Gun drillOZ25銑(Miling)BT50(32) | |
| 主軸軸數Number of Spindle | / | 2軸 | |
| 潤滑方式Lubrication Method | / | 中間潤滑Centralized Lubrication System | |
| 工作臺T型槽Worktable T-Slot | mm | 21.5 | |
| 電氣供給ElectricalSupply | V/A | 三相(3-phase)380V /60A | |
| 主軸連接方式Spindle Connection Method | 同步皮帶SynchronousBelt | ||
| 鉆孔的直線度Straightness of Drilling | mm | 孔徑線對基準的偏斜0.5/1000 | |
| 鉆孔的表面粗糙度Surface Roughness of Driling | μm | Ra≤3.2 | |
| 鉆孔的孔徑光潔度Aperture Roughness ofDriling Hole Diameter | H | H8-H11 | |
| 機床總重量Total Weight ofMachineTool | Ton | 19 | |
在線詢價?
公司產品
快速導航
聯系方式
選擇區號